Skip to content

Independent electronic component sourcing

AURIX TC297TA and TC264DA: ADAS Radar MCUs and Their TC3xx Successors

What the AURIX ADAS variants TC297TA and TC264DA offer: radar RAM, FFT acceleration, ordering codes and silicon steps, and the TC35xTA and TC39xXA successors.

  • AURIX
  • Automotive
  • Infineon
AURIX TC297TA and TC264DA: ADAS Radar MCUs and Their TC3xx Successors

Infineon's first-generation AURIX family includes two microcontrollers built for driver assistance systems: the TC297TA and the TC264DA. Infineon lists both as ADAS variants. Compared with the standard TC29x and TC26x parts, they add RAM for radar data, and the TC264DA adds a dedicated FFT accelerator. This guide explains what the "A" variants offer, how the two compare, and which second-generation AURIX TC3xx parts take over for new radar designs.

Short answer: the TC297TA is a triple-core, 300 MHz AURIX with 8 MB flash and about 2.7 MB RAM for radar, in a 292-ball BGA. The TC264DA is a dual-core, 200 MHz AURIX with 2.5 MB flash, 752 KB RAM and a hardware FFT unit, in a 144-pin LQFP. For new radar designs, Infineon's second generation offers the TC35xTA and TC39xXA, which add dedicated radar signal processing units (SPU).

What the "A" Means in TC297TA and TC264DA

Infineon groups these parts as "AURIX family – TC297TA (ADAS)" and "AURIX family – TC264DA (ADAS)". Infineon describes the TC297TA family as focused on ADAS, specifically radar and camera applications. In practice the ADAS variants carry more on-chip RAM than their standard siblings so that radar data can be held and processed on the MCU, and the TC264DA adds a dedicated FFT hardware acceleration unit for radar signal processing.

TC297TA vs TC264DA

ParameterTC297TATC264DA
Cores / lockstep cores3 / 1 TriCore, 300 MHz2 / 1 TriCore, 200 MHz
Program flash8 MB2.5 MB
RAM2778 KB, for radar752 KB, for radar
Radar acceleration3 × Delta-Sigma ADCDedicated FFT hardware unit
CAN nodes65
Other connectivity2 × FlexRay, 100 Mbit Ethernet, SENT, PSI5100 Mbit Ethernet, SENT, PSI5
Functional safetyASIL-D / SIL-3ASIL-D / SIL-3
PackageLFBGA-292LQFP-144
Ambient temperature (SAK)−40 °C to +125 °C−40 °C to +125 °C

Figures are from Infineon product pages for the BC silicon step. Confirm against the datasheet for your exact ordering code.

The TC297TA suits higher-end radar and camera ECUs that need more processing headroom, memory and FlexRay. The TC264DA suits smaller, cost-sensitive radar sensors where the FFT unit offloads the cores and a leaded LQFP package simplifies the board.

Ordering Codes and Silicon Steps

AURIX ordering codes end with a silicon step such as BB or BC. Distributor data lists SAK-TC297TA-128F300S BB as obsolete, while the BC step (OPN TC297TA128F300SBCKXUMA1) is listed by Infineon as active. For the TC264DA, the common code is SAK-TC264DA-40F200W BC (OPN TC264DA40F200WBCKXUMA1), which Infineon currently lists as available on request. If your approved BOM names an older step, check with your quality team whether a newer step is approved before ordering, and quote the full ordering code when you ask for stock.

Second Generation: TC35xTA and TC39xXA

In the AURIX TC3xx generation, Infineon's ADAS radar parts are the TC35xTA and TC39xXA families. Both add two Signal Processing Units (SPU) for radar, which handle FFT and other radar processing steps in hardware, and an LVDS radar interface for the front-end MMIC.

FamilyCores / lockstepFlashRAMRadar hardware
TC35xTA (e.g. TC357TA)3 / 2, up to 300 MHz4 MBabout 3.5 MB2 × SPU, LVDS radar interface
TC39xXA (e.g. TC397XA)6 / 4, 300 MHz16 MBabout 6.9 MB2 × SPU, LVDS radar interface

Infineon states that the TC35xTA and TC39xXA are software and pin-to-pin compatible with each other in the LFBGA-292 package, so one board can scale between them. Moving from a TC2xx part to TC3xx is a redesign rather than a part swap: the peripherals, memory map and radar processing chain change, so plan hardware review and a software port.

How to Choose

  • Existing TC297TA or TC264DA production: keep the qualified part and secure supply by exact ordering code and silicon step.
  • Cost-down radar sensor on TC2xx: the TC264DA with its FFT unit in LQFP-144.
  • New radar design: evaluate the TC35xTA, with a path to the TC39xXA for higher performance on the same footprint.
  • Non-radar ECUs: the standard TC29x, TC26x or TC3xx variants without the ADAS memory may be the better fit.

FAQ

What is the TC297TA used for?

It is the ADAS variant of the AURIX TC29x, aimed at radar and camera ECUs. It combines three TriCore cores at 300 MHz, ASIL-D support and about 2.7 MB of RAM for radar data.

What is the difference between the TC264DA and the TC264D?

The TC264DA is the ADAS variant. Infineon lists it with 752 KB RAM for radar and a dedicated FFT hardware acceleration unit.

Is the TC297TA obsolete?

Distributor data lists the BB step, SAK-TC297TA-128F300S BB, as obsolete. Infineon lists the BC step as active.

What replaces the TC297TA in the AURIX TC3xx generation?

For radar designs, the TC3xx ADAS families TC35xTA and TC39xXA, which add radar signal processing units. Migration needs a hardware and software review.

Summary

The TC297TA and TC264DA are the radar-focused members of the first AURIX generation: the TC297TA for higher-end ECUs, the TC264DA for compact sensors with hardware FFT. For existing production, secure the exact ordering code and silicon step; for new designs, look at the TC35xTA and TC39xXA.

Need TC297TA, TC264DA or a TC3xx part for your radar project? Request a quote with the full ordering code and we will check availability.

Browse the category

Can’t find the part you need?

Share a part number or upload your BOM.

Request a Quote

Render diagnostics